Wall_Repel_Behavior - superclass: ReferenceTarget; super-superclass:MAXWrapper - 13:0 - classID: #(1562862216, 1902539325)
<Wall_Repel_Behavior>.name String Default: "Wall Repel"
<Wall_Repel_Behavior>.repelGrids ArrayParameter Default: #() -- node array
Set the repelling grid.
<Wall_Repel_Behavior>.repelMethod Integer Default: 0 -- animatable
Determines whether delegate direction as influenced by the behavior is calculated by an angular method or a force method.
0 - Angle: Applies a force to the delegate based on the angle between the delegate's current direction and the direction it would need to take in order to be moving directly away from the source. If the behavior's Weight is set to 1 the delegate will be given a force that points directly away from the source. If Weight is set to .5, the force will bisect the angle between its current direction and the direction opposite that of the source.
1 - Force: : Always applies a force directly away from the source, but at different magnitudes. If the behavior's Weight is 1, the magnitude of the force will be the average speed. If the Weight is .5, the magnitude of the force will be half the average speed.
<Wall_Repel_Behavior>.repelDirection Integer Default: 0 -- animatable
Determines whether the grid repels from its positive-axis side, its negative-axis side, or both.
0 - Positive Axis: The grid repels only from the positive-axis side.
1 - Negative Axis: The grid repels only from the negative-axis side.
2 - Both Axes: The grid repels from both sides.
<Wall_Repel_Behavior>.useDistance Boolean Default: True
When true, the behavior applies only to delegates closer to the target than the outerRadius value.
<Wall_Repel_Behavior>.innerDistance Float Default: 0.0 -- animatable
The distance from the target at which the force is applied at full strength.
<Wall_Repel_Behavior>.outerDistance Float Default: 10.0 -- animatable
The distance from the target at which the force begins to be applied.
<Wall_Repel_Behavior>.falloff Float Default: 2.0 -- animatable
<Wall_Repel_Behavior>.showDistance Boolean Default: True
Shows the inner and outer distance settings as grids offset from the target grid in the viewports. The .innerDistance grid is light blue, while .outerDistance grid is blue-white.
<Wall_Repel_Behavior>.gridSpacing Integer Default: 500
Specifies the spacing of grid lines used to draw the Inner/Outer Distance grids. The lower the value, the closer the spacing.
<Wall_Repel_Behavior>.gridEnd Boolean Default: True Alias: End_force_at_grid_edges
When true, the force emanates only from the grid object. When off, the force emanates from an imaginary infinite grid created by extending the grid plane in all directions.
<Wall_Repel_Behavior>.forceColor Color Default: (color 255 0 255)
Sets the color used to draw the Wall Repel force during the solution.
<Wall_Repel_Behavior>.displayForce Boolean Default: True
The force, when activated, is drawn in the viewports as a wireframe rectangle during the simulation solution.
Crowd : Helper
MAXWrapper Common Properties, Operators, and Methods
Value Common Properties, Operators, and Methods
MAXScript Extensions in character studio